Full Truck Service in Bakersfield, CA
A full service is one visit that covers everything a truck needs on a scheduled interval, not just oil and filters, but the air system, brakes, driveline, cooling, electrical, and the wear items that put trucks out of service.
We do them at our shop on Pepper Drive in East Bakersfield, on tractors, trailers, and straight trucks.
One shop. One invoice. One day off the road instead of three.
One Visit. Every System Covered.
-
Engine & fluids
Oil and filter change to spec, fuel filters and water separator, air filter, belts, hoses, and a proper leak check. -
Cooling system
Coolant condition and freeze point, radiator and charge air cooler, fan clutch, hoses and clamps. Central Valley summers punish cooling systems, so we don't rush this one. -
Air system & brakes
Compressor and governor, air dryer, chamber pushrod stroke measured against spec, slack adjusters, linings, drums and rotors, plus a full leak-down test. -
Steering & suspension
Linkage, tie rods, kingpins, springs and hangers, bushings, shocks and torque rods. -
Driveline
U-joints, carrier bearings, driveshaft, diff and transmission fluids, wheel ends and seals. -
Tyres & wheels
Tread depth measured on every position, pressures set, wear patterns noted, fastener torque and rim condition. -
Electrical
Batteries, cables, grounds, alternator output, all lamps and reflectors, trailer cable and connector. -
Cab & safety
Wipers, glass, mirrors, seat belts, extinguisher, triangles, HVAC. -
Aftertreatment check
DPF pressure readings, regen history and fault codes pulled from the ECM, so nothing is building up out of sight.
Need a specific job rather than the full package? See DPF cleaning, oil and filter change, wheel alignment or diagnostics.
What’s Included in Our Full Truck Service?
1. Preventive Truck Maintenance
Regular maintenance helps identify developing problems before they become unexpected breakdowns. We service commercial trucks based on their maintenance needs and operating demands.
2. Engine & Computer Diagnostics
Warning lights, performance issues, and fault codes can have different causes. Our diagnostic service helps identify the underlying problem so the right repair can be determined.
3. Oil & Filter Service
Regular oil and filter changes are an important part of commercial truck maintenance. We replace engine oil and filters to help maintain proper engine performance.
4. DPF Cleaning & Aftertreatment Service
A loaded or restricted DPF can affect engine performance and contribute to additional problems. Flying Bird Truck Repair provides DPF cleaning as part of its commercial truck service offering.
5. Brake Inspection & Repair
Brake problems can affect stopping performance and vehicle safety. We inspect and service applicable commercial truck brake components when repair is needed.
6. Tire Alignment & Balancing
Poor alignment can contribute to uneven tire wear and handling issues. Our truck tire services include alignment, balancing, inspection, and related tire maintenance.
7. 90-Day BIT Inspections
Flying Bird Truck Repair provides 90-day BIT inspections to help commercial operators address applicable inspection and safety requirements.
Service and BIT Inspection Together
Most of our customers pair their full service with their 90-day BIT inspection. Same visit, same trip, and anything the inspection turns up gets repaired while the truck is already here.
That’s the difference between losing one day and losing three. Tell us when your inspection is due, and we’ll line them up.
Built for Owner-Operators and Fleets Alike
-
Running one truck?
Downtime is income. We'll tell you straight what needs doing now and what can wait until next service, and we'll get you rolling. -
Running a fleet?
We stagger your units, so your whole operation isn't parked in the same week, and we can fold servicing into a scheduled maintenance programme so nothing slips. -
Tractors, trailers, and straight trucks.
Trailers get their own service, including landing gear, suspension, wheel ends, brakes, lighting, and coupling hardware.
Revitalize Your Fleet, Drive with Confidence: Contact Flying Bird Truck Repair!
Whether you are a fleet owner or a single owner, Flying Bird Truck Repair aims to be your go-to place in Bakersfield, California, for all your truck repair needs. We are always willing to go above and beyond basic repairs because we have an unwavering dedication to quality and satisfying our customers’ needs.
Based on the tenets of quality service, trust, confidence, and a desire to maintain your fleet or individual truck in top shape, we hope to establish enduring relationships with our clients. We strive to be your go-to destination for all types of truck repairs in Bakersfield.
- Experienced Team
- Full-Service Solutions
- Adherence to Industry Standards
- Cost+Efficient Solutions
- Transparent Communication
- Personalized Approaches
In Need of Efficient Truck Solutions? We're Here for You!
No matter if it’s an alignment, oil change, or full truck service, let Flying Bird Truck Repair take away all the hassle you can face on the road.
Everything under one roof
Service, inspections, diagnostics, aftertreatment, tyres, and roadside: you're not chasing four vendors and four invoices.
Measurements, not guesswork
Brake stroke figures and tread depths on your report, so you can see what we saw.
No surprises on the bill
You approve the price before the work starts. If a job grows, you hear it from us first.
Heavy-duty only.
Commercial trucks, trailers, and fleet equipment are what we do all day.
COMMON QUESTIONS
Most Popular Questions.
How often should I give my fleet of commercial trucks full-service maintenance?
It is advised to have a full service maintenance every 12,000 to 15,000 miles, based on how often you use your truck. This all-inclusive method guarantees that every part of your cars is examined and maintained to the highest standard.
How important is it to have routine oil filter changes?
The health of an engine depends on routine oil filter changes and services. Your trucks will last longer because they keep impurities from building up and guarantee peak engine performance.
What's involved in a 90-day BIT inspection?
The 90-day BIT Inspection is a thorough assessment mandated by law. It guarantees that your commercial trucks adhere to legal requirements and safety standards, enhancing traffic safety and averting fines.
How often should I have my truck's DPF cleaned?
It is generally advised to have your DPF cleaned every 100,000 miles. It lowers emissions, keeps engines operating at maximum efficiency, and guards against expensive DPF-related problems.
Why should I trust Flying Bird Truck Repair with my truck maintenance?
Flying Bird Repair is the place to go for expert truck maintenance, a skilled team, and comprehensive services. For optimal fleet performance, experience efficiency, adherence to standards, and open communication.